Back
The Future of Federal GHG Reporting: What’s Changing and What Still Matters

The Future of Federal GHG Reporting: What’s Changing and What Still Matters

The U.S. Environmental Protection Agency’s (EPA) Greenhouse Gas Reporting Program (GHGRP) has been an important source of greenhouse gas (GHG) emissions data for the oil and natural gas industry since reporting began in 2011. The program requires applicable facilities to quantify and report emissions of carbon dioxide (CO₂), methane (CH₄), and other GHGs.

Recent EPA rulemaking actions have created uncertainty regarding the future of federal GHG reporting. EPA has proposed eliminating reporting requirements for most industrial source categories and suspending reporting for much of the petroleum and

Understanding the distinction between existing requirements, finalized changes, and proposed revisions is important for operators evaluating their GHG reporting obligations.

Current Federal GHG Reporting Requirements

EPA’s GHGRP, established under 40 CFR Part 98, requires annual reporting of GHG emissions from specified industrial facility types, fuel suppliers, and other sources. The program includes 47 source categories, including the oil and natural gas industry.

Generally, annual reporting is required when facility emissions equal or exceed 25,000 metric tons of carbon dioxide equivalent (CO₂e), although applicability thresholds and requirements vary by source category.

Two subparts are particularly important to the oil and natural gas industry:

Subpart C – General Stationary Fuel Combustion Sources

Subpart C requires reporting of GHG emissions from stationary fuel combustion equipment, including engines, turbines, boilers, and process heaters. Emissions are generally calculated using fuel consumption, fuel characteristics, and emission factors.

Subpart W – Petroleum and Natural Gas Systems

Subpart W requires GHG reporting of emissions from venting, flaring, fugitive leaks and other sources across ten petroleum and natural gas industry sectors, including onshore and offshore production, gathering and boosting, natural gas processing, transmission and storage, LNG storage and import/export operations, and natural gas distribution.

Fuel combustion emissions are reported differently depending on the industry sector. Certain Subpart W sectors, including onshore production, gathering and boosting, and natural gas distribution, calculate and report combustion emissions directly under Subpart W, while other sectors report general stationary combustion sources under Subpart C.

Current Federal GHG Reporting Deadlines

Under 40 CFR 98.3(b), annual GHG reports are normally due March 31 of the year following the reporting year. However, EPA has extended the deadline for Reporting Year 2025 (RY2025).

Current federal reporting deadlines as of November 2026:

  • RY2025: March 10, 2027. EPA established this deadline through an interim final rule published October 14, 2026, superseding the previous October 30, 2026, deadline.
  • RY2026: March 31, 2027. This remains the deadline under the current general reporting schedule, pending further EPA action.

The RY2025 deadline was initially extended from March 31, 2026, to October 30, 2026, through a February 27, 2026, final rule. EPA subsequently extended it to March 10, 2027, to allow additional time to consider proposed revisions to the GHGRP.

Importantly, the current extension applies only to RY2025. Unless EPA takes further action, facilities subject to Part 98 must meet the applicable reporting deadlines.

EPA’s Proposed Changes to GHG Reporting

On September 16, 2025, EPA published a proposed rule titled Reconsideration of the Greenhouse Gas Reporting Program.

The proposal would substantially reduce federal GHG reporting requirements, beginning with RY2025.

  • 46 GHGRP Source Categories: Permanently eliminate reporting requirements for all 46 source categories other than Subpart W, beginning with RY2025, including stationary fuel combustion sources under Subpart C.
  • Subpart W – Natural Gas Distribution: Permanently eliminate reporting requirements for this industry sector beginning with RY2025.
  • Subpart W – Remaining Nine Industry Sectors: Suspend reporting requirements for RY2025 through RY2033, with reporting resuming for RY2034.

The proposed suspension of reporting for nine petroleum and natural gas industry sectors is related to changes in the Clean Air Act’s Methane Waste Emissions Charge, commonly called the “methane fee.”

Section 136 of the Clean Air Act established the methane fee for facilities in nine covered petroleum and natural gas industry (excluding natural gas distribution) sectors subject to Subpart W reporting that exceed specified GHG emissions and methane intensity thresholds.

In July 2025, Congress amended the Clean Air Act (CAA) to delay implementation of the methane fee until RY2034. Because the fee relies on Subpart W emissions data to determine applicability and calculate charges, EPA proposed suspending rather than permanently eliminating reporting requirements for these nine industry sectors.

As of November 2026, EPA has finalized extensions to the RY2025 reporting deadline but has not finalized its broader proposal to eliminate or suspend GHGRP reporting requirements.

Consequently, operators should distinguish between the reporting requirements currently in effect and those that would apply if EPA finalizes the proposal.

Why Emissions Management Still Matters

Although federal GHG reporting requirements may change, oil and natural gas operators have reasons to continue monitoring, measuring, and managing their emissions.

Changes to the GHGRP do not automatically eliminate other regulatory obligations, including requirements under New Source Performance Standards (NSPS), state air quality permits, and state methane emissions regulations.

Several states also maintain independent GHG reporting programs that are not necessarily affected by changes to federal reporting requirements.

Beyond regulatory compliance, maintaining accurate emissions inventories and monitoring emissions control equipment can help operators identify significant emission sources, evaluate control equipment performance, reduce hydrocarbon losses, and improve operating efficiency.

Operators should continue to evaluate their emissions management practices based on applicable regulatory requirements and operational objectives.

How Cimarron Can Help

Cimarron provides emissions control technologies, monitoring systems, and measurement services that can help oil and natural gas operators manage emissions and maintain effective emissions control systems.

GHG Emissions Inventories and Data Management

Operators can use operating records, fuel consumption, flaring data, and emissions monitoring results to maintain emissions inventories, identify significant emission sources, and track emissions over time.

Cimarron solutions include:

  • Sytelink 360® system that uses real-time monitoring, AI, and machine learning to track emissions control equipment performance, flag out-of-range operating parameters, issue alerts, and support emissions reporting and regulatory compliance.
  • Flare monitoring.
  • LDAR services to identify fugitive emissions sources.
  • Vent gas measurement to quantify emissions from equipment and process vents.

Emissions Control Equipment

Flares, vapor combustion units (VCUs), and vapor recovery units (VRUs) can significantly reduce methane emissions. Operators should account for control efficiency, equipment downtime, and vent gas bypass events when evaluating emissions and control equipment performance.

Cimarron solutions include:

  • Flares and VCUs to control methane and VOC emissions.
  • VRUs to capture hydrocarbon vapors for beneficial use.
  • Sytelink 360® for real-time emissions monitoring, equipment performance tracking, and emissions data management.

Emissions Measurement and Estimation

Operators can quantify GHG emissions using direct measurement methods. For emission sources such as storage tanks, equipment leaks, and process vents, site-specific measurements and operating data can improve emissions estimates compared with generic emission factors.

Cimarron solutions include:

  • LDAR services, including optical gas imaging, to identify and repair equipment leaks.
  • Direct vent gas measurement to quantify emissions and improve emissions estimates.

Supporting Other Emissions Compliance Requirements

Changes to federal GHGRP requirements do not affect other applicable air quality regulations. Operators should independently evaluate their monitoring, emissions control, and reporting obligations.

Cimarron provides emissions testing, flare destruction and removal efficiency (DRE) testing, equipment performance optimization, preventive maintenance, replacement parts, repairs, and retrofits to help operators maintain reliable emissions control systems and comply with applicable regulatory requirements.

Regardless of the outcome of EPA’s proposed GHGRP revisions, effective emissions management remains important for regulatory compliance, equipment performance, and minimizing hydrocarbon losses.

For more information about Cimarron’s emissions management solutions, visit www.cimarron.com.