Copyright © Cimarron Energy, Inc. All Rights Reserved
Created by Byers Creative

Gas Processing Units

With several ASME code facilities in the US certified to build and refurbish/repair pressure vessels, Cimarron has the capacity and geographic reach out to most major US basins. We also produce natural gas dehydration equipment for glycol.

Glycol Dehydration

Cimarron offers a variety of glycol dehydration designs to reduce the water content of natural gas prior to transport or further processing, as well as field service to help train personnel and maintain your dehydration equipment. We have designed and manufactured glycol dehydration units from small 1 MMSCFD field units to large 250 MMSCFD multi-skid systems for transmission compressor stations. While the desired water content is typically 5 to 7 lbs of water per MMBtu of gas, we often design for lower dewpoints as well by improving the glycol regeneration.

With several ASME code facilities in the US certified to build and refurbish/repair pressure vessels, Cimarron has the capacity and geographic reach out to most major US basins.

    Gas Processing UnitNatural gas processing presents some difficult challenges due to its varied composition and phase changes with pressure, as well as the need to remove water and deleterious elements commonly present in gas, such as carbon dioxide and hydrogen sulfide. Gas also contains highly valuable hydrocarbons produced as liquids from the gas, including ethane, propane, butanes, and pentanes, which are used in fuels and as petrochemical feedstocks. Key processes used in processing gas are removal of acid gases, or “sweetening”, dehydration, and temperature reduction using Joule-Thomson expansion or mechanical refrigeration.

Colorado

    Evans, CO

    • 10,000 sq.ft manufacturing facility
    • ASME code, “U” & “R” stamps; skid manufacturing; piping capability; new and refurbish.
    • Product Line Focus: All Production Equipment, Heater Treaters, 2PH and 2PH Separators skidded and bare vessel, Glycol Towers, Gas Scrubbers, Vertical Recovery Towers, Refurbish of Oil and Gas equipment, etc.

    Wheatridge, CO:

    • 5,000 sq.ft manufacturing facility
    • Electronics design; PLC programing; new and repairs
    • Product Line Focus: Burner Management Systems (ARControl), Remote Monitoring Systems (Sytelink)

Ohio

    Belpre, OH

    • 25,000 sq.ft manufacturing facility
    • Skid manufacturing; piping capability; PLC programing; new and refurbish
    • Product Line Focus: Gas Production Units, Line Heaters, Vapor Recovery Units, Vapor Recovery Towers, Enclosed Combustors, Plunger lift Controllers & Equipment, Complete repair & refurbish

Oklahoma

    Marlow, OK:

    • 60,000 sq.ft manufacturing facility
    • ASME code, “U” & “R” stamps; skid manufacturing; piping capability; new and refurbish
    • Product Line Focus: All Production Equipment, Heater Treaters, 2PH and 2PH Separators skidded and bare vessel, Glycol Towers, Gas Scrubbers, Vertical Recovery Towers, Pipe Skids, etc.

    Norman, OK:

    • 55,000 sq.ft manufacturing facility
    • ASME code, “U” stamps; Stainless Steel equipment; skid manufacturing; piping capability; new and refurbish
    • Product Line Focus: Enclosed Combustors, Vapor Recovery units, Flares, Glycol Dehydration units

Texas

    Midland, TX:

    • 15,000 sq.ft manufacturing facility
    • Skid manufacturing; Enclosed Combustors manufacturing; piping capability; PLC programing; new and refurbish
    • Product Line Focus: Vapor Recovery units (over 60 years oof manufacturing), Stainless Steel equipment

Related Pages